Grate - Coonara Grate - 390mm x 300mm

This aftermarket (Australian Made) Coonara wood fire heater single solid end grate suits the following Coonara wood heaters

Coonara Wood Heaters

• Coonara Classic 1200 Freestander
  • 1988 - 1995
  • Pre 1988 used a open grate - this part now substitutes for the open grate
• Coonara Premier Large Freestander
  • Series 1 1988 - 1990
  • Series 2 1990 - 1995
• Coonara Premier Large Insert
  • Series 2 1990 - 1995
• Coonara Classic 2100 Fireplace Insert
  • 1988 - 1994
  • Pre 1988 used a open grate - this part now substitutes for the open grate
• Coonara Hi Tech 1600 Console
  • 1986 - 1987 used a open grate - this part now substitutes for the open grate
• Coonara Hi Tech 2200 Fireplace Insert
  • 1986 1987 used a open grate - this part now substitutes for the open grate
• Coonara Premier Large Insert Series 1 1988 - 1990
  • if you have the above heater and you have the original curved bricks you will also need to purchase a fire brick 230mm X 115mm X 38mm and cut 2 smaller bricks 30mm X 38mm to insert at the rear corners to stop the grate sliding too far back as the original grate size was 390mm x 340mm.

This grate is an aftermarket Coonara wood heater grate measuring 390mm x 300mm.

It is a closed grate with the old original Coonara part number

• 1265 - closed grate
• 3172 - open grate
• 1974 - requires 2 additional bricks for Coonara Premier Large Insert Series 1 (1988 - 1990)

The open grate is the older model grate which has been superceeded by the closed grate.

These grates are now Australian Made.

Please choose carefully - Refund/Returns Policy.